Product Overview

This series of products includes epoxy, hybrid, polyester, polyurethane and other systems, designed to meet the needs of various complex indoor and outdoor environments.

Product Features

Colorful or simple style, to meet diverse aesthetic needs.Excellent substrate defect hiding ability.Uniform and stable pattern shape, with excellent pattern reproducibility.

Application areas

Furniture products

Shelf system

Iron hardware

Fitness equipment

Lighting products

Security doors

Safes

Industrial equipment

Product series

Surface effect classification (both suitable for indoor and outdoor environments):

Sand effect

Wrinkle effect

Point diffusion effect

Hammer effect

Shrinkage effect

Metallic appearance effect

Technical parameters

Basic properties of powder:

Specific gravity: 1.1~1.8g/cm³

Coating properties

Mechanical properties	Pencil hardness	GB/T6739-1996	≥H
	Adhesion	GB/T9286-1998	Grade 0
	Bending	GB6742-86	Φ3mm
	Impact	GB/T1732-93	50kg.cm
	Cupping	GB 9753-88	>6mm
Corrosion resistance	Salt spray resistance	GB/T1771-91	No change in coating film after 500-1000 hours, unilateral corrosion at the cross section <2mm
	Moisture and heat resistance	GB/T1740-79	>1000 hours slight gloss loss, ≤Grade 1
Weather resistance		Depends on the type of powder coating
Note: The above parameters are laboratory data for reference only. The actual indicators are related to factors such as customer environment, equipment, substrate, pretreatment, and spraying process.

Application conditions

Pretreatment: Phosphating or chromizing treatment is required.

Coating method:

Suitable for corona electrostatic coating.

Artistic effect may vary depending on the process.

Baking conditions: Determined according to the type of product curing system (no specific temperature/time is provided).

Packaging

Carton packaging, lined with polyethylene plastic bags.

Net weight: 20kg/box.

Storage conditions

Environmental requirements: temperature ≤30℃, dry and ventilated, avoid direct sunlight.

Shelf life: 6 months (when the above conditions are met).

Safety and health tips

The raw materials are non-toxic, and no toxic gas is released during baking.

Operation protection:

A dust mask must be worn (avoid inhaling dust).

Reduce long-term skin contact, and the attached coating can be washed with soap.