Product Introduction:
This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents, designed and manufactured based on the latest formulation concepts. It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, impact, and high temperatures.Product Usage:
For internal and external anti-corrosion coatings of water supply pipes used in firefighting systems.Product Features:Excellent adhesion to the substrate.Strong anti-corrosion capability.Good leveling, high gloss, and dense coating.Superior high-temperature cathodic disbondment resistance.Extremely strong flexibility, capable of passing the 4/5 flattening and post-grooving tests.Good performance in withstanding high and low temperatures.Strong resistance to boiling water.Powder Performance:

Property	Specification	Notes
Adhesion	Excellent
Corrosion Resistance	Superior
Leveling	Good, high gloss, dense coating
Cathodic Disbondment Resistance	Excellent at high temperatures
Flexibility	Extremely strong, passes 4/5 flattening and post-grooving tests
Temperature Resistance	Good performance in high and low temperatures
Boiling Water Resistance	Strong resistance

Curing Conditions:

Property	Specification	Notes
Temperature	Referenced to workpiece temperature	Deviations may affect performance
Heating Method	Medium-frequency heating or other heating methods

Application Parameters:

Parameter	Specification	Notes
Applicable Equipment	Frictional charging spray, corona electrostatic spray, dip coating
Film Thickness	150-450um	Adjustable according to workpiece requirements

Health and Safety:

Property	Specification	Notes
Toxicity	Non-toxic
Flammability	Non-flammable
Regulation	GB15607-1995	Coating operation safety regulations

Precautions:

Item	Specification	Notes
Outdoor Use	Not recommended	May cause fading and chalking
Surface Preparation	Oil-free, water-free, surface treatment to Sa21/2 level (GB/T8923), anchor pattern depth 40-100um, clean surface from dust and abrasives
Preheating	Temperature controlled between 180-240°C
Storage	Ventilated, dry, below 30°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 4 layers, avoid long-term pressure, keep packaging sealed
Curing Temperature	Preheat steel pipe surface to above 200°C for better curing completion rate

Compliance Standards:
GB/T 5135.20-2010 “Coated Steel Pipes for Automatic Sprinkler Fire-Protection Systems”;
CJ/T 120-2008 “Plastic-Coated Composite Steel Pipes for Water Supply”