Product Introduction:
This product is formulated using phenolic epoxy resin and incorporates modified conductive polymers and conductive materials, combining the advantages of intrinsic and doped conductivity. It is specifically designed for conductive heavy-duty anti-corrosion powder coatings. The surface resistivity of the coating can reach below 10⁵ Ω, effectively eliminating static electricity accumulation in gas drainage pipes and preventing static sparks, thereby enhancing safety. The coating features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility and impact resistance.

Product Usage:
Special anti-static and anti-corrosion coating for gas ventilation and drainage pipes in coal mines.

Product Features:

Excellent adhesion to the substrate.First application of a new material combining intrinsic and doped conductivity.Good conductivity of the coating, with surface resistivity reaching 10⁵ Ω, effectively eliminating surface charge accumulation.Superior high-temperature cathodic disbondment resistance.Low melting temperature, high reactivity, high curing completion rate, and good mechanical properties.Contains composite flame retardants, providing certain flame-retardant effects.

Powder Performance:

Property	Specification	Notes
Adhesion	Excellent
Conductivity	Surface resistivity below 10⁵ Ω
Cathodic Disbondment Resistance	Superior at high temperatures
Flexibility	Extremely strong, passes 4/5 flattening and post-grooving tests
Temperature Resistance	Good performance in high and low temperatures
Flame Retardancy	Contains composite flame retardants

 

Curing Conditions:

Property	Specification	Notes
Temperature	Referenced to workpiece temperature	Deviations may affect performance
Heating Method	Medium-frequency heating or other heating methods

 

Application Parameters:

Parameter	Specification	Notes
Applicable Equipment	Frictional charging spray, corona electrostatic spray, dip coating, roll coating
Film Thickness	250-450um	Adjustable according to workpiece requirements

 

Health and Safety:

Property	Specification	Notes
Toxicity	Non-toxic
Flammability	Non-flammable
Regulation	GB15607-1995	Coating operation safety regulations

 

Precautions:

Item	Specification	Notes
Outdoor Use	Not recommended	May cause fading and chalking
Surface Preparation	Oil-free, water-free, surface treatment to Sa21/2 level (GB/T8923), anchor pattern depth 40-100um, clean surface from dust and abrasives
Preheating	Temperature controlled between 180-250°C, not exceeding 250°C
Storage	Ventilated, dry, below 30°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 5 layers, avoid long-term pressure, keep packaging sealed
Curing Temperature	Preheat steel pipe surface to above 200°C for better curing completion rate

 

Compliance Standards:
MT 181-88 “Safety Performance Testing Specifications for Plastic Pipes Used in Coal Mines”