Product Introduction:
This product is a thermosetting epoxy-modified heavy-duty anti-corrosion powder coating specifically designed for reinforcing steel. The formulation uses partially imported functional epoxy resins and dedicated anti-corrosion curing agents. It features excellent reactivity, strong adhesion, good flexibility, and bendability, as well as superior resistance to chemicals, solvents, cathodic disbondment, and impact.

 

Product Usage:
Widely used for corrosion protection of reinforcing steel in bridges, ports, airports, buildings, basements, high-speed railways, and other infrastructure projects.

 

Product Features:

Excellent adhesion to the substrate.Dense, continuous, bright coating with low permeability and minimal pinholes.Superior cathodic disbondment resistance and high electrical insulation.High bond strength with concrete.Good flexibility, does not crack when bent.Low melting temperature, high reactivity, high curing completion rate, and good mechanical properties.Versatile and low powder consumption.Reduces or eliminates stringing during the powder coating process.

 

Powder Performance:

Property	Specification	Notes
Adhesion	Excellent
Coating Density	Dense, continuous, bright
Cathodic Disbondment Resistance	Superior
Electrical Insulation	High
Bond Strength with Concrete	High
Flexibility	Good, does not crack when bent
Temperature Resistance	Low melting temperature, high reactivity
Mechanical Properties	Good

 

Curing Conditions:

Property	Specification	Notes
Temperature	210-250°C for 3-1.5 minutes	Deviations may affect performance

 

Application Parameters:

Parameter	Specification	Notes
Applicable Equipment	Frictional charging spray, corona electrostatic spray, dip coating
Film Thickness	120-250um	Adjustable according to workpiece requirements

 

Health and Safety:

Property	Specification	Notes
Toxicity	Non-toxic
Flammability	Non-flammable
Regulation	GB15607-1995	Coating operation safety regulations

 

Precautions:

Item	Specification	Notes
Outdoor Use	Not recommended	May cause fading and chalking
Surface Preparation	Clean oxide scale, reveal metal color, surface roughness 50-70um, rust removal grade Sa21/2, no chloride residues
Preheating	Temperature controlled between 220-245°C
Storage	Ventilated, dry, below 27°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 5 layers, avoid long-term pressure, keep packaging sealed
Storage Period	Best within 3 months at 27°C, validate performance if used beyond this period

 

Compliance Standards:
JC3042-1997 “Epoxy Coated Reinforcing Steel”;
GB/T25826-2010 “Epoxy Coated Reinforcing Steel for Concrete Structures”