Introduction:

Made of antistatic materials, suitable for indoor and outdoor environments

Features:

The volume resistivity of the coating is as low as 106-1010 Ω· cm, which prevents the accumulation of static electricity on the surface of the equipment and protects the equipment.

It can resist static electricity for a long time.

Use: Suitable for coating and protection of the surface of electrical appliances and equipment to reduce static electricity accumulation.

Application parameters:

Curing time:       200℃×10–15 minutes

Spraying method:      High voltage electrostatic spraying 60-80 KV

Recommended film thickness:      60-80 um

Physical properties:

The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 40 to 80um. The performance indicators of the coating will vary slightly with the gloss.

This product does not contain heavy metals such as arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, etc., and meets RoHS requirements.

Storage conditions: Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested and can still be used if the results meet the requirements.

Note: The test indicators mentioned in this report are all data obtained from laboratory tests and are for reference only, not as a performance commitment for product application. The results may vary depending on environmental factors and other conditions.