Powder coatings for brake calipers MT-A1243 /MT-BW104GF / MT-301.727S

Product details

Product Description

MT-A1243 for brake components combines toughness and durability with excellent corrosion and chemical resistance. They also come in a range of colors to meet the varied design needs for brake pads, brake discs, calipers and other wheel hardware that is visible in an open wheel design.

Powder properties

Chemical Type	Epoxy
Area of usage	Brake calipers
Apprearance	Smooth, glossy
Colour	Anthracite metallic
Gloss (60°)	75 ± 5 GU
Density (g/cm3)	1.55 ± 0.05
Stoving schedule	10 minutes at 180°C (time at object temperature)
Application	Electrostatic
Storage Stability	Under dry, cool (<25°C) conditions, at least 12 months from production date

Test Conditions

The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.

Substrate	Steel panels
Pretreatment	Bonder (WH/60/OC) iron phosphate
Film thickness	70 µm
Cure schedule	10 minutes at 180°C

Mechanical Tests

Adhesion	DIN EN ISO 2409	Gt 0
Erichsen cupping	DIN EN ISO 1520	≥ 4 mm

Pre-treatment

Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1243. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.

Application

MT-A1243 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.