Cardolite NC-562 is a 65% solids, low viscosity, adducted phenalkamine curing agent designed for medium and high solids

epoxy coating applications. This curing agent has very fast cure even at very low temperatures, and can provide excellent

adhesion on difficult substrates, such as an inorganic zinc primer and degreased galvanized steel. Film quality of coatings

using this curing agent is excellent, showing no blush even at low temperatures and high humidity. Like other Cardolite

phenalkamines, this curing agent has good adhesion on wet or otherwise unprepared surfaces, and can provide

outstanding water resistance and corrosion protection.


 

Cardolite NC-562 is suitable for fast curing medium and high solids surface tolerant marine, industrial, and protective

coatings. This product’s fast cure and good hardness make it ideal for applications requiring fast return to service or

multiple coats over a short period of time. It can be used for coating applications under cold and humid conditions, even

over damp and poorly prepared surfaces. Good flexibility and adhesion on various metal/primed substrates make this

curing agent especially suitable for primers of marine, transportation, and general industrial equipment. Its ability to cure

quickly over a wide temperature range, including below 0°C, combined with a good pot life at room temperature brings

coatings based on this curing agent broad application latitude and good workability